Models Try it

For your trade

Joinery Joiners and cabinetmakers Electrical Electricians and electronics technicians Tiling Tile and slab layers Plumbing Plumbing, heating and air conditioning Workshop Makers and workshops

Pricing Log in Create account

DE EN

Models Ready-made parts to adjust Try it Describe a part, no account needed Pricing What it costs

For your trade

Account

Log in Create account 50 free generations

Language

DE EN

Talk2CAD › Makers and workshops

Talk2CAD for Workshop

For makers and workshops.

The idea takes ten seconds. Modelling it used to take two hours.

Describe a part – no account Typical parts

You know exactly what the part should look like. It does not fail on skill, but on the fact that sketch, extrusion and dimensioning eat two hours – for a part that prints in thirty minutes. Describe it, have it built, and adjust what does not fit.

What you build with it

Six parts you cannot buy like that.

Enclosure for a circuit board

Outer dimensions, wall thickness, cut-outs for sockets and screw bosses – all as numbers, not as a sketch.

Tool holder for the pegboard

One holder, one grid, as many tools as you like.

Drilling and assembly jig

So the twentieth hole sits like the first.

Dust extraction adapter

Between tool port and vacuum hose – the classic that never exists in exactly your combination.

Spare gear

Enter module, tooth count, bore and hub. The model works out the teeth.

Insert for the sorting box

Compartments to fit your parts, not the box's own layout.

Ready-made models

Free as an STL. Dimensions adjustable right on the model – no account.

Staying honest

What a printed part can do – and what it cannot.

Not every part belongs in the printer

Printed gears run, but not forever under load. PLA becomes brittle outdoors under UV. And anything that safety depends on – climbing harness, tow hitch, overhead mount – does not belong in the printer, however good it looks.

Choosing the material

PLA for shaped parts and prototypes, PETG for mechanics and heat, ASA for outdoors. With jigs it pays to set the wall thickness a millimetre higher than it looks.

Frequently asked questions

How is this different from a configurator?

A configurator only knows the parts somebody created beforehand. Here the model comes out of your description – and still gets sliders afterwards, because it is built as parametric source code, not as a rigid mesh.

Do I get the source code?

Yes, as an OpenSCAD file. You can carry on writing it in an editor or keep building locally – you are not tied to anything.

What if the result does not fit?

Then you say what is wrong ("move the bore 2 mm further out") instead of starting over. The model gets changed, not replaced.

Does this work from inside Claude?

Yes. Talk2CAD can be added as a connector in the Claude app and in Claude Code - you describe the part in the conversation and get the STL back without opening the application. Same account, same credits, same projects. How to set it up is described under /connector.

What are you waiting for?
Off to production.

Describe your part. 50 generations on the house – and you see up front what comes after that.

Create account Try a part first

Also for your trade:

Joinery Electrical Tiling Plumbing

For makers and workshops.

What you build with it

Enclosure for a circuit board

Tool holder for the pegboard

Drilling and assembly jig

Dust extraction adapter

Spare gear

Insert for the sorting box

Ready-made models

Staubsauger-Adapter 40 mm auf 60 mm für Werkstattsauger

Rohrschelle 32 mm mit Schraublasche

Absaug-Adapter 35 mm auf 27 mm für Elektrowerkzeug

Kabelclip 5 mm selbstklebend für Schreibtischkante

Möbelwinkel 40 × 50 mm mit vier Bohrungen für M6

Gehäuse-Unterteil 92 × 62 mm mit Lüftungsschlitzen

Distanzhülse M4 mit Bund, 12 mm